def

archiso/airootfs/etc/gshadow

@@ -0,0 +1,16 @@
+root:::root
+sys:!!::liveuser
+network:!!::liveuser
+power:!!::liveuser
+adm:!!::liveuser
+wheel:!!::liveuser
+uucp:!!::liveuser
+optical:!!::liveuser
+rfkill:!!::liveuser
+video:!!::liveuser
+storage:!!::liveuser
+audio:!!::liveuser
+users:!!::liveuser
+nopasswdlogin:!::liveuser
+autologin:!::liveuser
+liveuser:!::

archiso/airootfs/etc/mkinitcpio.conf

@@ -0,0 +1,73 @@
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(usbhid xhci_hcd)
+MODULES=()
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=(setfont)
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No RAID, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect modconf block filesystems fsck)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev modconf block filesystems fsck)
+#
+##   This setup assembles a mdadm array with an encrypted root file system.
+##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
+#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
+#
+##   This setup loads an lvm2 volume group.
+#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr and fsck hooks.
+HOOKS=(base udev modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, zstd compression
+# is used. Use 'cat' to create an uncompressed image.
+COMPRESSION="zstd"
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+#COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()
+
+# MODULES_DECOMPRESS
+# Decompress kernel modules during initramfs creation.
+# Enable to speedup boot process, disable to save RAM
+# during early userspace. Switch (yes/no).
+#MODULES_DECOMPRESS="yes"

archiso/airootfs/etc/mkinitcpio.d/linux-zen.preset

@@ -0,0 +1,12 @@
+# mkinitcpio preset file for the kernel
+
+#ALL_config='/etc/mkinitcpio.conf'
+ALL_kver='/boot/vmlinuz-linux-zen'
+ALL_microcode=(/boot/*-ucode.img)
+
+PRESETS=('default' 'fallback')
+
+default_image="/boot/initramfs-linux-zen.img"
+
+fallback_image="/boot/initramfs-linux-zen-fallback.img"
+fallback_options="-S autodetect"

archiso/airootfs/etc/mkinitcpio.d/linux.preset

@@ -1,8 +0,0 @@
-# mkinitcpio preset file for the 'linux' package on archiso
-
-PRESETS=('archiso')
-
-ALL_kver='/boot/vmlinuz-linux'
-archiso_config='/etc/mkinitcpio.conf.d/archiso.conf'
-
-archiso_image="/boot/initramfs-linux.img"

archiso/airootfs/etc/mkinitcpio.d/snigdhaos

@@ -0,0 +1,12 @@
+# mkinitcpio preset file for the kernel
+
+#ALL_config='/etc/mkinitcpio.conf'
+ALL_kver='/boot/vmlinuz-linux'
+ALL_microcode=(/boot/*-ucode.img)
+
+PRESETS=('default' 'fallback')
+
+default_image="/boot/initramfs-linux.img"
+
+fallback_image="/boot/initramfs-linux-fallback.img"
+fallback_options="-S autodetect"

archiso/airootfs/etc/motd

@@ -1,11 +0,0 @@
-To install Arch Linux follow the installation guide:
-https://wiki.archlinux.org/title/Installation_guide
-
-For Wi-Fi, authenticate to the wireless network using the iwctl utility.
-For mobile broadband (WWAN) modems, connect with the mmcli utility.
-Ethernet, WLAN and WWAN interfaces using DHCP should work automatically.
-
-After connecting to the internet, the installation guide can be accessed
-via the convenience script Installation_guide.
-
-