⏳ @eshanized updated the repository!!!

calamares/modules/shellprocess-before.conf

@@ -97,7 +97,7 @@ script:
 #     - "-touch ${ROOT}/tmp/thingy"
 #     - "/usr/bin/true"
     - command: "/usr/local/bin/snigdhaos-before"
-      timeout: 3600
+     #  timeout: 3600
 
 # You can change the description of the job (as it is displayed in the
 # progress bar during installation) by defining an *i18n* key, which

calamares/modules/shellprocess-final.conf

@@ -1,11 +1,112 @@
-i18n:
+# SPDX-FileCopyrightText: no
-     name: "Preparing your system for ArcoLinux"
+# SPDX-License-Identifier: CC0-1.0
-
+#
+# Configuration for the shell process job.
+#
+# Executes a list of commands found under the key *script*.
+# If the top-level key *dontChroot* is true, then the commands
+# are executed in the context of the live system, otherwise
+# in the context of the target system. In all of the commands,
+# the following variable expansions will take place:
+#  - `ROOT` is replaced by the root mount point of the **target**
+#    system from the point of view of the command (when run in the target
+#    system, e.g. when *dontChroot* is false, that will be `/`).
+#  - `USER` is replaced by the username, set on the user page.
+#  - `LANG` is replaced by the language chosen for the user-interface
+#    of Calamares, set on the welcome page. This may not reflect the
+#    chosen system language from the locale page.
+#
+# Variables are written as `${var}`, e.g. `${ROOT}`.
+# Write `$$` to get a shell-escaped `\$` in the shell command.
+# It is not possible to get an un-escaped `$` in the shell command
+# (either the command will fail because of undefined variables, or
+# you get a shell-escaped `\$`).
+#
+# The (global) timeout for the command list can be set with
+# the *timeout* key. The value is a time in seconds, default
+# is 30 seconds if not set. The timeout **must** be tuned, either
+# globally or per-command (see below in the description of *script*),
+# to the load or expected running-time of the command.
+#
+#  - Setting a timeout of 30 for a `touch` command is probably exessive
+#  - Setting a timeout of 1 for a `touch` command might be low,
+#    on a slow disk where touch needs to be loaded from CDROM
+#  - Setting a timeout of 30 for a 1GB download is definitely low
+#  - Setting a timeout of 3600 for a 1GB download is going to leave
+#    the user in uncertainty for a loooong time.
+#
+# If a command starts with "-" (a single minus sign), then the
+# return value of the command following the - is ignored; otherwise,
+# a failing command will abort the installation. This is much like
+# make's use of - in a command.
+#
+# The value of *script* may be:
+#   - a single string; this is one command that is executed.
+#   - a single object (see below).
+#   - a list of items; these are executed one at a time, by
+#     separate shells (/bin/sh -c is invoked for each command).
+#     Each list item may be:
+#     - a single string; this is one command that is executed.
+#     - a single object, specifying a key *command* and (optionally)
+#       a key *timeout* to set the timeout for this specific
+#       command differently from the global setting. An optional
+#       key *environment* is a list of strings to put into the
+#       environment of the command.
+#
+# Using a single object is not generally useful because the same effect
+# can be obtained with a single string and a global timeout, except
+# when the command needs environment-settings. When there are
+# multiple commands to execute, one of them might have
+# a different timeout than the others.
+#
+# The environment strings should all be "KEY='some value'" strings,
+# as if they can be typed into the shell. Quoting the environment
+# strings with "" in YAML is recommended. Adding the '' quotes ensures
+# that the value will not be interpreted by the shell. Writing
+# environment strings is the same as placing `export KEY='some value' ;`
+# in front of the *command*.
+#
+# Calamares variable expansion is **also** done on the environment strings.
+# Write `$$` to get a literal `$` in the shell command.
+#
+# To change the description of the job, set the *name* entries in *i18n*.
+---
+# Set to true to run in host, rather than target system
 dontChroot: false
+# Tune this for the commands you're actually running
 timeout: 999
+
+# Script may be a single string (because false returns an error exit
+# code, this will trigger a failure in the installation):
+#
+# script: "/usr/bin/false"
+
+# Script may be a list of strings (because false returns an error exit
+# code, **but** the command starts with a "-", the error exit is
+# ignored and installation continues):
+#
+# script:
+#     - "-/usr/bin/false"
+#     - "/bin/ls"
+#     - "/usr/bin/true"
+
+# Script may be a list of items (if the touch command fails, it is
+# ignored; the slowloris command has a different timeout from the
+# other commands in the list):
 script:
-    - command: "/usr/local/bin/arcolinux-all-cores"
+#     - "-touch ${ROOT}/tmp/thingy"
-    - command: "/usr/local/bin/arcolinux-displaymanager-check"
+#     - "/usr/bin/true"
-    - command: "/usr/local/bin/arcolinux-final"
+    - command: "/usr/local/bin/snigdhaos-before"
-    - command: "/usr/bin/pacman -R --noconfirm arcolinux-system-installation-git"
+     #  timeout: 3600
-    - command: "/usr/local/bin/arcolinux-snapper"
+
+# You can change the description of the job (as it is displayed in the
+# progress bar during installation) by defining an *i18n* key, which
+# has a *name* field and optionally, translations as *name[lang]*.
+#
+# Without a translation here, the default name from the source code
+# is used, "Shell Processes Job".
+#
+i18n:
+    name: "Preparing Your Machine for SNIGDHA OS..."
+#     name[nl]: "Schelpenpad"
+#     name[en_GB]: "Just a moment"