it87: upstream version
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
35
Makefile
Normal file
35
Makefile
Normal file
@@ -0,0 +1,35 @@
|
|||||||
|
# For building for the current running version of Linux
|
||||||
|
TARGET := $(shell uname -r)
|
||||||
|
# Or specific version
|
||||||
|
#TARGET := 2.6.33.5
|
||||||
|
KERNEL_MODULES := /lib/modules/$(TARGET)
|
||||||
|
KERNEL_BUILD := $(KERNEL_MODULES)/build
|
||||||
|
# KERNEL_BUILD := /usr/src/linux-headers-$(TARGET)
|
||||||
|
|
||||||
|
#SYSTEM_MAP := $(KERNEL_BUILD)/System.map
|
||||||
|
SYSTEM_MAP := /boot/System.map-$(TARGET)
|
||||||
|
|
||||||
|
DRIVER := it87
|
||||||
|
|
||||||
|
# Directory below /lib/modules/$(TARGET)/kernel into which to install
|
||||||
|
# the module:
|
||||||
|
MOD_SUBDIR = drivers/hwmon
|
||||||
|
|
||||||
|
obj-m := $(DRIVER).o
|
||||||
|
|
||||||
|
MAKEFLAGS += --no-print-directory
|
||||||
|
|
||||||
|
.PHONY: all install modules modules_install clean
|
||||||
|
|
||||||
|
all: modules
|
||||||
|
|
||||||
|
# Targets for running make directly in the external module directory:
|
||||||
|
|
||||||
|
modules clean:
|
||||||
|
@$(MAKE) -C $(KERNEL_BUILD) M=$(CURDIR) $@
|
||||||
|
|
||||||
|
install: modules_install
|
||||||
|
|
||||||
|
modules_install:
|
||||||
|
cp $(DRIVER).ko $(KERNEL_MODULES)/kernel/$(MOD_SUBDIR)
|
||||||
|
depmod -a -F $(SYSTEM_MAP) $(TARGET)
|
||||||
201
README
Normal file
201
README
Normal file
@@ -0,0 +1,201 @@
|
|||||||
|
Kernel driver it87
|
||||||
|
==================
|
||||||
|
|
||||||
|
Supported chips:
|
||||||
|
* IT8705F
|
||||||
|
Prefix: 'it87'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: Once publicly available at the ITE website, but no longer
|
||||||
|
* IT8712F
|
||||||
|
Prefix: 'it8712'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: Once publicly available at the ITE website, but no longer
|
||||||
|
* IT8716F/IT8726F
|
||||||
|
Prefix: 'it8716'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: Once publicly available at the ITE website, but no longer
|
||||||
|
* IT8718F
|
||||||
|
Prefix: 'it8718'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: Once publicly available at the ITE website, but no longer
|
||||||
|
* IT8720F
|
||||||
|
Prefix: 'it8720'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: Not publicly available
|
||||||
|
* IT8721F/IT8758E
|
||||||
|
Prefix: 'it8721'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: Not publicly available
|
||||||
|
* IT8728F
|
||||||
|
Prefix: 'it8728'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: Not publicly available
|
||||||
|
* SiS950 [clone of IT8705F]
|
||||||
|
Prefix: 'it87'
|
||||||
|
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||||
|
Datasheet: No longer be available
|
||||||
|
|
||||||
|
Authors:
|
||||||
|
Christophe Gauthron
|
||||||
|
Jean Delvare <khali@linux-fr.org>
|
||||||
|
|
||||||
|
|
||||||
|
Module Parameters
|
||||||
|
-----------------
|
||||||
|
|
||||||
|
* update_vbat: int
|
||||||
|
|
||||||
|
0 if vbat should report power on value, 1 if vbat should be updated after
|
||||||
|
each read. Default is 0. On some boards the battery voltage is provided
|
||||||
|
by either the battery or the onboard power supply. Only the first reading
|
||||||
|
at power on will be the actual battery voltage (which the chip does
|
||||||
|
automatically). On other boards the battery voltage is always fed to
|
||||||
|
the chip so can be read at any time. Excessive reading may decrease
|
||||||
|
battery life but no information is given in the datasheet.
|
||||||
|
|
||||||
|
* fix_pwm_polarity int
|
||||||
|
|
||||||
|
Force PWM polarity to active high (DANGEROUS). Some chips are
|
||||||
|
misconfigured by BIOS - PWM values would be inverted. This option tries
|
||||||
|
to fix this. Please contact your BIOS manufacturer and ask him for fix.
|
||||||
|
|
||||||
|
|
||||||
|
Hardware Interfaces
|
||||||
|
-------------------
|
||||||
|
|
||||||
|
All the chips suported by this driver are LPC Super-I/O chips, accessed
|
||||||
|
through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
|
||||||
|
SMBus interface to the hardware monitoring functions. This driver no
|
||||||
|
longer supports this interface though, as it is slower and less reliable
|
||||||
|
than the ISA access, and was only available on a small number of
|
||||||
|
motherboard models.
|
||||||
|
|
||||||
|
|
||||||
|
Description
|
||||||
|
-----------
|
||||||
|
|
||||||
|
This driver implements support for the IT8705F, IT8712F, IT8716F,
|
||||||
|
IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips.
|
||||||
|
|
||||||
|
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
|
||||||
|
joysticks and other miscellaneous stuff. For hardware monitoring, they
|
||||||
|
include an 'environment controller' with 3 temperature sensors, 3 fan
|
||||||
|
rotation speed sensors, 8 voltage sensors, associated alarms, and chassis
|
||||||
|
intrusion detection.
|
||||||
|
|
||||||
|
The IT8712F and IT8716F additionally feature VID inputs, used to report
|
||||||
|
the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
|
||||||
|
the IT8716F and late IT8712F have 6. They are shared with other functions
|
||||||
|
though, so the functionality may not be available on a given system.
|
||||||
|
|
||||||
|
The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
|
||||||
|
is stored in the Super-I/O configuration space. Due to technical limitations,
|
||||||
|
this value can currently only be read once at initialization time, so
|
||||||
|
the driver won't notice and report changes in the VID value. The two
|
||||||
|
upper VID bits share their pins with voltage inputs (in5 and in6) so you
|
||||||
|
can't have both on a given board.
|
||||||
|
|
||||||
|
The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
|
||||||
|
have support for 2 additional fans. The additional fans are supported by the
|
||||||
|
driver.
|
||||||
|
|
||||||
|
The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and
|
||||||
|
IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This
|
||||||
|
is better (no more fan clock divider mess) but not compatible with the older
|
||||||
|
chips and revisions. The 16-bit tachometer mode is enabled by the driver when
|
||||||
|
one of the above chips is detected.
|
||||||
|
|
||||||
|
The IT8726F is just bit enhanced IT8716F with additional hardware
|
||||||
|
for AMD power sequencing. Therefore the chip will appear as IT8716F
|
||||||
|
to userspace applications.
|
||||||
|
|
||||||
|
The IT8728F is considered compatible with the IT8721F, until a datasheet
|
||||||
|
becomes available (hopefully.)
|
||||||
|
|
||||||
|
Temperatures are measured in degrees Celsius. An alarm is triggered once
|
||||||
|
when the Overtemperature Shutdown limit is crossed.
|
||||||
|
|
||||||
|
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
|
||||||
|
triggered if the rotation speed has dropped below a programmable limit. When
|
||||||
|
16-bit tachometer counters aren't used, fan readings can be divided by
|
||||||
|
a programmable divider (1, 2, 4 or 8) to give the readings more range or
|
||||||
|
accuracy. With a divider of 2, the lowest representable value is around
|
||||||
|
2600 RPM. Not all RPM values can accurately be represented, so some rounding
|
||||||
|
is done.
|
||||||
|
|
||||||
|
Voltage sensors (also known as IN sensors) report their values in volts. An
|
||||||
|
alarm is triggered if the voltage has crossed a programmable minimum or
|
||||||
|
maximum limit. Note that minimum in this case always means 'closest to
|
||||||
|
zero'; this is important for negative voltage measurements. All voltage
|
||||||
|
inputs can measure voltages between 0 and 4.08 volts, with a resolution of
|
||||||
|
0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery
|
||||||
|
voltage in8 does not have limit registers.
|
||||||
|
|
||||||
|
On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
|
||||||
|
the chip (in7, in8 and optionally in3). The driver handles this transparently
|
||||||
|
so user-space doesn't have to care.
|
||||||
|
|
||||||
|
The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
|
||||||
|
the voltage level your processor should work with. This is hardcoded by
|
||||||
|
the mainboard and/or processor itself. It is a value in volts.
|
||||||
|
|
||||||
|
If an alarm triggers, it will remain triggered until the hardware register
|
||||||
|
is read at least once. This means that the cause for the alarm may already
|
||||||
|
have disappeared! Note that in the current implementation, all hardware
|
||||||
|
registers are read whenever any data is read (unless it is less than 1.5
|
||||||
|
seconds since the last update). This means that you can easily miss
|
||||||
|
once-only alarms.
|
||||||
|
|
||||||
|
Out-of-limit readings can also result in beeping, if the chip is properly
|
||||||
|
wired and configured. Beeping can be enabled or disabled per sensor type
|
||||||
|
(temperatures, voltages and fans.)
|
||||||
|
|
||||||
|
The IT87xx only updates its values each 1.5 seconds; reading it more often
|
||||||
|
will do no harm, but will return 'old' values.
|
||||||
|
|
||||||
|
To change sensor N to a thermistor, 'echo 4 > tempN_type' where N is 1, 2,
|
||||||
|
or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
|
||||||
|
Give 0 for unused sensor. Any other value is invalid. To configure this at
|
||||||
|
startup, consult lm_sensors's /etc/sensors.conf. (4 = thermistor;
|
||||||
|
3 = thermal diode)
|
||||||
|
|
||||||
|
|
||||||
|
Fan speed control
|
||||||
|
-----------------
|
||||||
|
|
||||||
|
The fan speed control features are limited to manual PWM mode. Automatic
|
||||||
|
"Smart Guardian" mode control handling is only implemented for older chips
|
||||||
|
(see below.) However if you want to go for "manual mode" just write 1 to
|
||||||
|
pwmN_enable.
|
||||||
|
|
||||||
|
If you are only able to control the fan speed with very small PWM values,
|
||||||
|
try lowering the PWM base frequency (pwm1_freq). Depending on the fan,
|
||||||
|
it may give you a somewhat greater control range. The same frequency is
|
||||||
|
used to drive all fan outputs, which is why pwm2_freq and pwm3_freq are
|
||||||
|
read-only.
|
||||||
|
|
||||||
|
|
||||||
|
Automatic fan speed control (old interface)
|
||||||
|
-------------------------------------------
|
||||||
|
|
||||||
|
The driver supports the old interface to automatic fan speed control
|
||||||
|
which is implemented by IT8705F chips up to revision F and IT8712F
|
||||||
|
chips up to revision G.
|
||||||
|
|
||||||
|
This interface implements 4 temperature vs. PWM output trip points.
|
||||||
|
The PWM output of trip point 4 is always the maximum value (fan running
|
||||||
|
at full speed) while the PWM output of the other 3 trip points can be
|
||||||
|
freely chosen. The temperature of all 4 trip points can be freely chosen.
|
||||||
|
Additionally, trip point 1 has an hysteresis temperature attached, to
|
||||||
|
prevent fast switching between fan on and off.
|
||||||
|
|
||||||
|
The chip automatically computes the PWM output value based on the input
|
||||||
|
temperature, based on this simple rule: if the temperature value is
|
||||||
|
between trip point N and trip point N+1 then the PWM output value is
|
||||||
|
the one of trip point N. The automatic control mode is less flexible
|
||||||
|
than the manual control mode, but it reacts faster, is more robust and
|
||||||
|
doesn't use CPU cycles.
|
||||||
|
|
||||||
|
Trip points must be set properly before switching to automatic fan speed
|
||||||
|
control mode. The driver will perform basic integrity checks before
|
||||||
|
actually switching to automatic control mode.
|
||||||
Reference in New Issue
Block a user