The chip is similar to IT8732E, but supports only three fans
instead of four (the driver currently does not support the 4th
fan on IT8732E).
Note that the chip ID is 0x8733, not 0x8792 as one would expect.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If sensor attributes were never read, the pwm control data has not been
initiialized, which can cause wrong driver behavior. Ensure that cached
data is current before acting on it.
Reported-by: Kevin Folz <kfolz@evertz.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Configuration registers on ITE8622 are different to 8620 and 8628 and
require special handling. Also, the chip supports up to 5 pwm controls.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On IT8622E and IT8628E, VIN3 is expected to be connected to +5V.
Add feature flag and reflect in input label.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for 6 pwm channels on IT8620E
Fix pwm frequency value for newer chips
Add second pwm frequency control for newer chips
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Newer chips don't typically support VID inputs or control.
Add a feature flag for VID support to simplify adding support
for new chips.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fans 4-5 are not supported on all chips and revisions. Also, 16-bit fan
counters only need to be enabled on older chips. Provide feature flags
to simplify adding support for new chips.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Open Hardware Monitor considers IT8771E, IT8772E to be compatible with IT8721F.
Let's see if that is correct. Use at your own risk.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
