52 lines
2.1 KiB
YAML
52 lines
2.1 KiB
YAML
# This example configuration is creating two thermal zones, one with amdgpu/temp1_input as source,
|
|
# the other one with coretemp/temp1_input as source.
|
|
# Some options have additional comments for explanation.
|
|
|
|
# Set target log level. If you have a problem or want to report an issue set this to DEBUG,
|
|
# otherwise INFO is a good value.
|
|
loglevel: DEBUG
|
|
|
|
# Set interval in which PyFan is checking your temp sources and adjusts PWM values.
|
|
interval: 1
|
|
|
|
thermalzones:
|
|
- name: GPU+SYSTEM
|
|
# This is your source temperature.
|
|
source: amdgpu/temp1_input
|
|
# This is most likely 1000 for your temp sensor as well.
|
|
# If not, check what you sensor is outputing if you try to read from it.
|
|
factor: 1000
|
|
# Define all fans that this thermal zone is going to control.
|
|
# There is no limit to how many fans one thermal zone can control.
|
|
# You can have different limitations on your fans, for example:
|
|
# - amdgpu/pwm1: 170
|
|
# means your GPU fan's pwm1 is never getting set higher than 170, limiting its max. rpm value.
|
|
# You can specify an lower limit as well:
|
|
# - it8686/pwm1: [100, 200]
|
|
# means your fan's pwm is never set under 100, and never over 200.
|
|
fan:
|
|
- it8686/pwm2
|
|
- amdgpu/pwm1: 170
|
|
# This is your target temperature. This is one of the main control knobs. Set this to a comfortable temperature for
|
|
# your equipment. Don't set this as high as its max temperature allowance, since pid is gonna allow some overshooting.
|
|
target: 60
|
|
# For understanding PID please have a look at https://en.wikipedia.org/wiki/PID_controller. The forementioned page
|
|
# also explains what p, i and d stand for and what they do in detail. These are the second main control knobs.
|
|
# Simplified you can view them as:
|
|
# p = how heavy should pid weight difference in temperature
|
|
# i = how heavy should pid weight difference in temperature over time
|
|
# d = how heavy should pid weight rate of chance in temperature
|
|
pid:
|
|
p: 1
|
|
i: 1
|
|
d: 1.5
|
|
- name: CPU
|
|
source: coretemp/temp1_input
|
|
factor: 1000
|
|
fan:
|
|
- it8686/pwm1: [100, 200]
|
|
target: 50
|
|
pid:
|
|
p: 1
|
|
i: 1
|
|
d: 1.5 |