From 41213af5e6adbec5397e4d6b5dc6a9d2fef535b5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 12 May 2021 13:33:14 +0200 Subject: [PATCH] openwrt: add documentation for uci options in the config file Signed-off-by: Felix Fietkau --- openwrt/usteer/files/etc/config/usteer | 104 +++++++++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/openwrt/usteer/files/etc/config/usteer b/openwrt/usteer/files/etc/config/usteer index 9be3d85..47e6d52 100644 --- a/openwrt/usteer/files/etc/config/usteer +++ b/openwrt/usteer/files/etc/config/usteer @@ -1,4 +1,108 @@ config usteer + # The network interface for inter-AP communication option 'network' 'lan' + + # Log messages to syslog (0/1) option 'syslog' '1' + + # Minimum level of logged messages + # 0 = fatal + # 1 = info + # 2 = verbose + # 3 = some debug messages + # 4 = network packet information + # 5 = all debug messages option 'debug_level' '2' + + # Maximum amount of time (ms) a station may be blocked due to policy decisions + #option sta_block_timeout 30000 + + # Maximum amount of time (ms) a local unconnected station is tracked + #option local_sta_timeout 120000 + + # Local station information update interval (ms) + #option local_sta_update 1000 + + # Maximum number of consecutive times a station may be blocked by policy + #option max_retry_band 5 + + # Maximum idle time of a station entry (ms) to be considered for policy decisions + #option seen_policy_timeout 30000 + + # Minimum number of stations delta between APs before load balancing policy is active + #option load_balancing_threshold 5 + + # Minimum number of stations delta between bands before band steering policy is active + #option band_steering_threshold 5 + + # Interval (ms) between sending state updates to other APs + #option remote_update_interval 1000 + + # Allow rejecting assoc requests for steering purposes (0/1) + #option assoc_steering 0 + + # Minimum signal-to-noise ratio or signal level (dBm) to allow connections + #option min_connect_snr 0 + + # Minimum signal-to-noise ratio or signal level (dBm) to remain connected + #option min_snr 0 + + # Minimum signal-to-noise ratio or signal level (dBm) before attempting to trigger + # client scans for roaming + #option roam_scan_snr 0 + + # Maximum number of client roaming scan trigger attempts + #option roam_scan_tries 3 + + # Minimum time (ms) between client roaming scan trigger attempts + #option roam_scan_interval 10000 + + # Minimum signal-to-noise ratio or signal level (dBm) before attempting to trigger + # forced client roaming + #option roam_trigger_snr 0 + + # Minimum time (ms) between client roaming trigger attempts + #option roam_trigger_interval 60000 + + # Timeout (in 100ms beacon intervals) for client roam requests + #option roam_kick_delay 100 + + # Minimum signal strength difference until AP steering policy is active + #option signal_diff_threshold 0 + + # Initial delay (ms) before responding to probe requests (to allow other APs to see packets as well) + #option initial_connect_delay 0 + + # Enable kicking client on excessive channel load (0/1) + #option load_kick_enabled 0 + + # Minimum channel load (%) before kicking clients + #option load_kick_threshold 75 + + # Minimum amount of time (ms) that channel load is above threshold before starting to kick clients + #option load_kick_delay 10000 + + # Minimum number of connected clients before kicking based on channel load + #option load_kick_min_clients 10 + + # Reason code on client kick based on channel load (default: WLAN_REASON_DISASSOC_AP_BUSY) + #option load_kick_reason_code 5 + + # Script to run after bringing up a node + #option node_up_script '' + + # Message types to include in log + # Available types: + # - probe_req_accept + # - probe_req_deny + # - auth_req_accept + # - auth_req_deny + # - assoc_req_accept + # - assoc_req_deny + # - load_kick_trigger + # - load_kick_reset + # - load_kick_min_clients + # - load_kick_no_client + # - load_kick_client + # - signal_kick + #option event_log_types ''