refactor: improve robustness and consistency across all scripts

- kb-blackout: optimize trim(), fix log units, add jit fallback
- ac-power: extract error handling helper, add capture_stderr,
  validate timeout, add security note, rename CONFIG to config
- touch-gestures: add min_brightness config, optimize brightnessctl
  to single call, improve wpctl regex, add shutdown handler

scripts/ac-power.lua

@@ -7,10 +7,14 @@
     * Survives flaky networks with capped exponential backoff, optional HUD error messages, and redraws of the last known value after OSD clears.
 
   Configuration:
-    Edit the CONFIG table below to match your Home Assistant deployment; the script ignores script-opts files.
+    Edit the config table below to match your Home Assistant deployment; the script ignores script-opts files.
+
+  Security:
+    The ha_token is a long-lived access token. Avoid committing it to version control.
+    Consider storing this script outside of shared repositories or using a separate config file.
 ]]
 
-local CONFIG = {
+local config = {
   sensor_id = "sensor.ac_power", -- Home Assistant entity id
   ha_base_url = "http://homeassistant.local:8123",
   ha_token = "REPLACE_WITH_LONG_LIVED_TOKEN",
@@ -60,58 +64,60 @@ end
 local function build_url()
   return string.format(
     "%s/api/states/%s",
-    trim_trailing_slash(CONFIG.ha_base_url),
-    CONFIG.sensor_id
+    trim_trailing_slash(config.ha_base_url),
+    config.sensor_id
   )
 end
 
 local function build_request()
-  local args = { CONFIG.curl_binary, "-sS", "-m", tostring(CONFIG.http_timeout) }
-  if CONFIG.insecure_ssl then
+  local timeout = tonumber(config.http_timeout) or 2
+  local args = { config.curl_binary, "-sS", "-m", tostring(timeout) }
+  if config.insecure_ssl then
     table.insert(args, "-k")
   end
   table.insert(args, "-H")
-  table.insert(args, "Authorization: Bearer " .. CONFIG.ha_token)
+  table.insert(args, "Authorization: Bearer " .. config.ha_token)
   table.insert(args, build_url())
   return {
     name = "subprocess",
     playback_only = false,
     capture_stdout = true,
+    capture_stderr = true,
     args = args,
   }
 end
 
 local function format_value(value)
-  local fmt = "%0." .. tostring(CONFIG.decimal_places) .. "f"
+  local fmt = "%0." .. tostring(config.decimal_places) .. "f"
   return string.format(fmt, value)
 end
 
 local function sensor_units(payload)
-  if CONFIG.use_sensor_unit and payload and payload.attributes then
+  if config.use_sensor_unit and payload and payload.attributes then
     local unit = payload.attributes.unit_of_measurement
     if unit and unit ~= "" then
       return unit
     end
   end
-  return CONFIG.units_label
+  return config.units_label
 end
 
 local function show_message(text, duration)
   local timeout = duration
   if timeout == nil then
-    timeout = CONFIG.display_timeout
+    timeout = config.display_timeout
   end
   mp.osd_message(text, timeout)
   last_display_ts = mp.get_time()
 end
 
 local function show_value(value_text, unit)
-  show_message(string.format("%s: %s %s", CONFIG.display_label, value_text, unit or ""))
+  show_message(string.format("%s: %s %s", config.display_label, value_text, unit or ""))
 end
 
 local function show_error(err)
-  if CONFIG.show_errors then
-    show_message(string.format("%s: -- (%s)", CONFIG.display_label, err))
+  if config.show_errors then
+    show_message(string.format("%s: -- (%s)", config.display_label, err))
   end
 end
 
@@ -125,6 +131,20 @@ local function ensure_poll_timer(delay, fn)
   end)
 end
 
+local poll_sensor
+
+local function schedule_retry()
+  backoff_failures = backoff_failures + 1
+  local next_delay = math.min(config.max_backoff, config.poll_interval * (2 ^ backoff_failures))
+  ensure_poll_timer(next_delay, poll_sensor)
+end
+
+local function handle_poll_error(message)
+  log("error", message)
+  show_error(message)
+  schedule_retry()
+end
+
 local function meets_delta_threshold(value)
   if not value then
     return false
@@ -134,11 +154,11 @@ local function meets_delta_threshold(value)
   end
 
   local delta = math.abs(value - last_watts)
-  if delta >= CONFIG.min_delta_watts then
+  if delta >= config.min_delta_watts then
     return true
   end
 
-  if CONFIG.min_delta_percent > 0 then
+  if config.min_delta_percent > 0 then
     local baseline = math.abs(last_watts)
     if baseline < 1e-6 then
       baseline = math.abs(value)
@@ -147,7 +167,7 @@ local function meets_delta_threshold(value)
       baseline = 1
     end
     local percent_delta = (delta / baseline) * 100
-    if percent_delta >= CONFIG.min_delta_percent then
+    if percent_delta >= config.min_delta_percent then
       return true
     end
   end
@@ -156,7 +176,7 @@ local function meets_delta_threshold(value)
 end
 
 local function thresholds_enabled()
-  return (CONFIG.min_delta_watts or 0) > 0 or (CONFIG.min_delta_percent or 0) > 0
+  return (config.min_delta_watts or 0) > 0 or (config.min_delta_percent or 0) > 0
 end
 
 local function handle_success(value, payload)
@@ -164,14 +184,14 @@ local function handle_success(value, payload)
   local now = mp.get_time()
   local printable = value and format_value(value) or "--"
   local unit = sensor_units(payload)
-  local force_due = CONFIG.force_refresh_interval > 0
-    and (now - last_display_ts) >= CONFIG.force_refresh_interval
+  local force_due = config.force_refresh_interval > 0
+    and (now - last_display_ts) >= config.force_refresh_interval
   local significant_change = meets_delta_threshold(value)
 
   local should_render = significant_change or last_watts == nil
   if not should_render and force_due then
     local allow_force = true
-    if thresholds_enabled() and CONFIG.force_refresh_obeys_threshold then
+    if thresholds_enabled() and config.force_refresh_obeys_threshold then
       allow_force = false
     end
     if allow_force then
@@ -191,15 +211,15 @@ local function redraw_last_value()
     show_value(format_value(last_watts), last_unit)
     return
   end
-  if CONFIG.initial_message and CONFIG.initial_message ~= "" then
+  if config.initial_message and config.initial_message ~= "" then
     show_message(
-      string.format("%s: %s", CONFIG.display_label, CONFIG.initial_message),
-      CONFIG.initial_message_duration
+      string.format("%s: %s", config.display_label, config.initial_message),
+      config.initial_message_duration
     )
   end
 end
 
-local function poll_sensor()
+poll_sensor = function()
   if request_inflight then
     return
   end
@@ -209,42 +229,25 @@ local function poll_sensor()
     request_inflight = false
 
     if not success or not result then
-      backoff_failures = backoff_failures + 1
-      local message = err or "request failed"
-      log("error", message)
-      show_error(message)
-      local next_delay = math.min(CONFIG.max_backoff, CONFIG.poll_interval * (2 ^ backoff_failures))
-      ensure_poll_timer(next_delay, poll_sensor)
+      handle_poll_error(err or "request failed")
       return
     end
 
     if result.status ~= 0 then
-      backoff_failures = backoff_failures + 1
       local stderr = (result.stderr and result.stderr ~= "" and result.stderr)
         or ("curl exit " .. tostring(result.status))
-      log("error", stderr)
-      show_error(stderr)
-      local next_delay = math.min(CONFIG.max_backoff, CONFIG.poll_interval * (2 ^ backoff_failures))
-      ensure_poll_timer(next_delay, poll_sensor)
+      handle_poll_error(stderr)
       return
     end
 
     if not result.stdout or result.stdout == "" then
-      backoff_failures = backoff_failures + 1
-      log("error", "empty response from Home Assistant")
-      show_error("empty response")
-      local next_delay = math.min(CONFIG.max_backoff, CONFIG.poll_interval * (2 ^ backoff_failures))
-      ensure_poll_timer(next_delay, poll_sensor)
+      handle_poll_error("empty response from Home Assistant")
       return
     end
 
     local payload = utils.parse_json(result.stdout)
     if not payload then
-      backoff_failures = backoff_failures + 1
-      log("error", "invalid JSON payload")
-      show_error("invalid JSON")
-      local next_delay = math.min(CONFIG.max_backoff, CONFIG.poll_interval * (2 ^ backoff_failures))
-      ensure_poll_timer(next_delay, poll_sensor)
+      handle_poll_error("invalid JSON payload")
       return
     end
 
@@ -257,22 +260,22 @@ local function poll_sensor()
     end
 
     backoff_failures = 0
-    ensure_poll_timer(CONFIG.poll_interval, poll_sensor)
+    ensure_poll_timer(config.poll_interval, poll_sensor)
   end)
 end
 
 local function validate_config()
-  if CONFIG.ha_base_url == "" then
+  if config.ha_base_url == "" then
     log("error", "ha_base_url is required")
     show_error("missing base url")
     return false
   end
-  if CONFIG.sensor_id == "" then
+  if config.sensor_id == "" then
     log("error", "sensor_id is required")
     show_error("missing sensor id")
     return false
   end
-  if CONFIG.ha_token == "" or CONFIG.ha_token == "REPLACE_WITH_LONG_LIVED_TOKEN" then
+  if config.ha_token == "" or config.ha_token == "REPLACE_WITH_LONG_LIVED_TOKEN" then
     log("error", "ha_token must be set to a Home Assistant long-lived token")
     show_error("missing HA token")
     return false
@@ -284,10 +287,10 @@ local function start()
   if not validate_config() then
     return
   end
-  if CONFIG.initial_message and CONFIG.initial_message ~= "" then
+  if config.initial_message and config.initial_message ~= "" then
     show_message(
-      string.format("%s: %s", CONFIG.display_label, CONFIG.initial_message),
-      CONFIG.initial_message_duration
+      string.format("%s: %s", config.display_label, config.initial_message),
+      config.initial_message_duration
     )
   end
   ensure_poll_timer(0.1, poll_sensor)

scripts/kb-blackout.lua

@@ -30,7 +30,7 @@ local config = {
 local mp = require("mp")
 local msg = require("mp.msg")
 local utils = require("mp.utils")
-local jit = rawget(_G, "jit")
+local jit = rawget(_G, "jit") or {}
 
 local function coerce_boolean(value, default)
   if type(value) == "boolean" then
@@ -137,7 +137,7 @@ if unsupported_platform() then
 end
 
 local function trim(str)
-  return (str and str:gsub("^%s+", ""):gsub("%s+$", "")) or ""
+  return str and str:match("^%s*(.-)%s*$") or ""
 end
 
 local function build_brightnessctl_args(extra)
@@ -315,8 +315,9 @@ end
 
 local function schedule_timer()
   cancel_timer()
-  state.timer = mp.add_timeout(seconds(config.timeout_ms), arm_disable_callback)
-  msg.verbose(("Inactivity timer armed for %.0f ms"):format(config.timeout_ms))
+  local delay = seconds(config.timeout_ms)
+  state.timer = mp.add_timeout(delay, arm_disable_callback)
+  msg.verbose(("Inactivity timer armed for %.1f s"):format(delay))
 end
 
 local function restore_backlight(reason)

scripts/touch-gestures.lua

@@ -2,10 +2,12 @@
   touch-gestures.lua - tablet-friendly swipe controls for mpv.
 
   Features:
+    * Horizontal swipes anywhere seek forward/backward.
     * Vertical swipes on the right edge raise/lower system volume; swipes on the left edge adjust screen brightness via brightnessctl.
+    * Gesture axis is locked on first significant movement, preventing accidental cross-axis actions.
     * Prefers PipeWire (`wpctl`) for volume, falls back to PulseAudio (`pactl`) automatically.
     * Configurable gesture zones, pixels-per-step sensitivity, per-control step sizes, and optional inverted direction.
-    * Shows OSD feedback after each adjustment so you know the new volume/brightness values.
+    * Shows OSD feedback after each adjustment.
 
   Configuration:
     Edit the `config` table below to tune zone widths, step sizes, and OSD duration; script-opts files are ignored.
@@ -17,10 +19,14 @@ local config = {
   deadzone_px = 4, -- ignore tiny jiggles before the first step (lower = snappier)
   volume_step = 5, -- percent per step
   brightness_step = 5, -- screen brightness percent per step
+  seek_step = 5, -- seconds per seek step
   max_volume = 130, -- clamp volume to this ceiling
-  invert_vertical = false, -- true flips the swipe direction
+  min_brightness = 1, -- minimum brightness percent (avoid turning off screen)
+  invert_vertical = false, -- true flips the vertical swipe direction
+  invert_horizontal = false, -- true flips the horizontal swipe direction
   left_zone_ratio = 0.35, -- fraction of width reserved for brightness (left side)
   right_zone_ratio = 0.35, -- fraction of width reserved for volume (right side)
+  top_exclude_ratio = 0, -- ignore top portion (e.g., title bar); 0 disables
   bottom_exclude_ratio = 0.15, -- ignore bottom portion (e.g., OSC area); 0 disables
   osd_duration = 1.2, -- seconds OSD stays visible; set 0 to disable
   log_debug = false, -- set true to log gesture details
@@ -37,14 +43,17 @@ local mp = require("mp")
 local msg = require("mp.msg")
 local utils = require("mp.utils")
 
-local show_osd
-
 local state = {
   active = false,
   zone = nil,
+  axis = nil, -- "horizontal" or "vertical", locked on first significant movement
   accum = 0,
   last_x = 0,
   last_y = 0,
+  start_x = 0, -- initial touch position for axis detection
+  start_y = 0,
+  button_down = false, -- track if mouse button is held (actual touch vs cursor movement)
+  forwarded_down = false, -- track if we forwarded a click to mpv (need to forward up too)
   volume_backend = nil, -- "wpctl" or "pactl"
   cached_volume_pct = nil,
   cached_brightness_pct = nil,
@@ -118,10 +127,25 @@ local function brightness_args(extra)
   return args
 end
 
+local function show_osd(label, value)
+  if config.osd_duration > 0 then
+    mp.osd_message(string.format("%s: %s", label, value), config.osd_duration)
+  end
+end
+
 local function current_brightness_percent()
   if state.cached_brightness_pct ~= nil then
     return state.cached_brightness_pct
   end
+  local out = run_cmd(brightness_args({ "-m", "info" }))
+  if out then
+    local cur, max = out:match(",(%d+),(%d+),")
+    local c, m = tonumber(cur), tonumber(max)
+    if c and m and m > 0 then
+      state.cached_brightness_pct = clamp((c / m) * 100, 0, 100)
+      return state.cached_brightness_pct
+    end
+  end
   local cur = run_cmd(brightness_args({ "get" }))
   local max = run_cmd(brightness_args({ "max" }))
   if not cur or not max then
@@ -137,7 +161,7 @@ local function current_brightness_percent()
 end
 
 local function set_brightness_percent(pct)
-  local target = clamp(pct, 0, 100)
+  local target = clamp(pct, config.min_brightness, 100)
   local ok = run_cmd(brightness_args({ "set", string.format("%.2f%%", target) }))
   if ok then
     state.cached_brightness_pct = target
@@ -155,7 +179,7 @@ local function current_volume_percent()
     if not out then
       return nil
     end
-    local val = out:match("(%d?%.?%d+)")
+    local val = out:match("Volume:%s*([%d%.]+)") or out:match("([%d%.]+)")
     val = val and tonumber(val)
     if not val then
       return nil
@@ -219,10 +243,18 @@ local function pick_zone(x, y, width, height)
   if width <= 0 then
     return nil
   end
-  if height and height > 0 and config.bottom_exclude_ratio > 0 then
-    local cutoff = height * (1 - config.bottom_exclude_ratio)
-    if y >= cutoff then
-      return nil
+  if height and height > 0 then
+    if config.top_exclude_ratio > 0 then
+      local top_cutoff = height * config.top_exclude_ratio
+      if y <= top_cutoff then
+        return nil
+      end
+    end
+    if config.bottom_exclude_ratio > 0 then
+      local bottom_cutoff = height * (1 - config.bottom_exclude_ratio)
+      if y >= bottom_cutoff then
+        return nil
+      end
     end
   end
   local left_limit = width * config.left_zone_ratio
@@ -236,12 +268,6 @@ local function pick_zone(x, y, width, height)
   return nil
 end
 
-function show_osd(label, value)
-  if config.osd_duration > 0 then
-    mp.osd_message(string.format("%s: %s", label, value), config.osd_duration)
-  end
-end
-
 local function apply_steps(kind, steps)
   if steps == 0 then
     return
@@ -260,6 +286,10 @@ local function apply_steps(kind, steps)
     end
     local next_value = current + (steps * config.brightness_step)
     set_brightness_percent(next_value)
+  elseif kind == "seek" then
+    local seconds = steps * config.seek_step
+    mp.commandv("seek", seconds, "relative")
+    show_osd("Seek", string.format("%+ds", seconds))
   end
 end
 
@@ -269,18 +299,33 @@ local function reset_state()
   end
   state.active = false
   state.zone = nil
+  state.axis = nil
   state.accum = 0
   state.last_x = 0
   state.last_y = 0
+  state.start_x = 0
+  state.start_y = 0
 end
 
-local function start_gesture(pos, zone)
+local function begin_gesture_tracking(pos)
   state.active = true
-  state.zone = zone
+  state.zone = nil
+  state.axis = nil
   state.accum = 0
   state.last_x = pos.x
   state.last_y = pos.y
-  dbg(string.format("start gesture zone=%s at (%.0f,%.0f)", zone, pos.x, pos.y))
+  state.start_x = pos.x
+  state.start_y = pos.y
+  state.cached_volume_pct = nil
+  state.cached_brightness_pct = nil
+  dbg(string.format("begin tracking at (%.0f,%.0f)", pos.x, pos.y))
+end
+
+local function lock_axis(axis, zone)
+  state.axis = axis
+  state.zone = zone
+  state.accum = 0
+  dbg(string.format("locked axis=%s zone=%s", axis, tostring(zone)))
 end
 
 local function update_gesture(_, pos)
@@ -288,48 +333,62 @@ local function update_gesture(_, pos)
     return
   end
 
-  if not state.active and config.start_on_move then
-    local width, height = surface_size()
-    local zone = pick_zone(pos.x, pos.y, width, height)
-    if zone then
-      start_gesture(pos, zone)
-    else
-      return
-    end
+  if not state.active and config.start_on_move and state.button_down then
+    begin_gesture_tracking(pos)
   end
 
   if not state.active then
     return
   end
 
+  local dx = pos.x - state.last_x
   local dy = pos.y - state.last_y
-  if config.invert_vertical then
-    dy = -dy
-  end
-
   state.last_x = pos.x
   state.last_y = pos.y
 
-  if math.abs(state.accum) < config.deadzone_px then
-    state.accum = state.accum + dy
-    if math.abs(state.accum) < config.deadzone_px then
+  if not state.axis then
+    local total_dx = math.abs(pos.x - state.start_x)
+    local total_dy = math.abs(pos.y - state.start_y)
+
+    if total_dx >= config.deadzone_px or total_dy >= config.deadzone_px then
+      if total_dx > total_dy then
+        lock_axis("horizontal", "seek")
+      else
+        local width, height = surface_size()
+        local zone = pick_zone(state.start_x, state.start_y, width, height)
+        if zone then
+          lock_axis("vertical", zone)
+        else
+          reset_state()
+          return
+        end
+      end
+    else
       return
     end
-    -- once deadzone crossed, drop the deadzone offset so first step is clean
-    if state.accum > 0 then
-      state.accum = state.accum - config.deadzone_px
-    else
-      state.accum = state.accum + config.deadzone_px
+  end
+
+  local delta
+  if state.axis == "horizontal" then
+    delta = dx
+    if config.invert_horizontal then
+      delta = -delta
     end
   else
-    state.accum = state.accum + dy
+    delta = dy
+    if config.invert_vertical then
+      delta = -delta
+    end
   end
 
+  state.accum = state.accum + delta
+
   local step_pixels = config.pixels_per_step
   if config.steps_per_screen and config.steps_per_screen > 0 then
-    local _, surf_h = surface_size()
-    if surf_h and surf_h > 0 then
-      step_pixels = surf_h / config.steps_per_screen
+    local surf_w, surf_h = surface_size()
+    local ref_size = state.axis == "horizontal" and surf_w or surf_h
+    if ref_size and ref_size > 0 then
+      step_pixels = ref_size / config.steps_per_screen
     end
   end
   if step_pixels <= 0 then
@@ -341,40 +400,86 @@ local function update_gesture(_, pos)
 
   if whole_steps ~= 0 then
     dbg(
-      string.format("zone=%s dy=%.2f accum=%.2f steps=%d", state.zone, dy, state.accum, whole_steps)
+      string.format(
+        "zone=%s axis=%s delta=%.2f accum=%.2f steps=%d",
+        state.zone,
+        state.axis,
+        delta,
+        state.accum,
+        whole_steps
+      )
     )
-    apply_steps(state.zone, -whole_steps)
+    local sign = state.axis == "horizontal" and 1 or -1
+    apply_steps(state.zone, sign * whole_steps)
     state.accum = state.accum - (whole_steps * step_pixels)
   end
 end
 
 local forwarding_click = false
 
+local function in_excluded_zone(pos)
+  local _, height = surface_size()
+  if not height or height <= 0 then
+    return false
+  end
+  if config.top_exclude_ratio > 0 then
+    local top_cutoff = height * config.top_exclude_ratio
+    if pos.y <= top_cutoff then
+      return true
+    end
+  end
+  if config.bottom_exclude_ratio > 0 then
+    local bottom_cutoff = height * (1 - config.bottom_exclude_ratio)
+    if pos.y >= bottom_cutoff then
+      return true
+    end
+  end
+  return false
+end
+
 local function handle_touch(event)
   if forwarding_click then
     return
   end
 
   if event.event == "down" then
+    state.button_down = true
+    state.forwarded_down = false
     local pos = mp.get_property_native("mouse-pos")
     if not pos or not pos.x or not pos.y then
       return
     end
 
-    local width, height = surface_size()
-    local zone = pick_zone(pos.x, pos.y, width, height)
-    if not zone then
+    if in_excluded_zone(pos) then
+      state.forwarded_down = true
       forwarding_click = true
-      mp.commandv("keypress", "mouse_btn0")
+      mp.commandv("keydown", "mouse_btn0")
       forwarding_click = false
       return
     end
 
-    start_gesture(pos, zone)
+    begin_gesture_tracking(pos)
   elseif event.event == "up" then
+    if state.forwarded_down then
+      forwarding_click = true
+      mp.commandv("keyup", "mouse_btn0")
+      forwarding_click = false
+    elseif state.active and not state.axis then
+      forwarding_click = true
+      mp.commandv("keypress", "mouse_btn0")
+      forwarding_click = false
+    end
+    state.button_down = false
+    state.forwarded_down = false
     reset_state()
   end
 end
 
 mp.add_forced_key_binding("mouse_btn0", "touch-gestures", handle_touch, { complex = true })
 mp.observe_property("mouse-pos", "native", update_gesture)
+
+mp.register_event("shutdown", function()
+  reset_state()
+end)
+
+pick_volume_backend()