Compare commits

..

48 Commits
v2.14 ... v3.2

Author SHA1 Message Date
Jan Engelhardt
5903f4bcfc Xtables-addons 3.2 2018-09-07 15:04:28 +02:00
Jan Engelhardt
5e19871613 geoip: build tool should not rely on directory name
Fix this:

	GeoLite2-Country-CSV_20180905$ /usr/lib/xtables-addons/xt_geoip_build

	Use of uninitialized value $dir in concatenation (.) or string at
	/usr/lib/xtables-addons/xt_geoip_build line 59.
	Couldn't open list country names

Do not rely on any directory names (they change). Use the current
directory as the default source directory, similar to the older
xt_geoip_build (well, *.csv was passed as arguments).
2018-09-07 15:03:20 +02:00
Jan Engelhardt
30fb410003 Xtables-addons 3.1 2018-08-14 14:31:10 +02:00
Jan Engelhardt
3ea761a1ed build: add support for Linux 4.18 2018-08-14 14:29:30 +02:00
Jan Engelhardt
4603d3e0f4 build: add support for Linux 4.17 2018-08-14 14:23:04 +02:00
Jan Engelhardt
b0b2b5a74c build: fix 4.16 warning 2018-08-14 14:22:40 +02:00
Jan Engelhardt
082d42fb21 build: match documented and coded build requirements 2018-08-14 14:22:17 +02:00
Jan Engelhardt
b1f0e118a0 doc: add 3.0 headline in changelog 2018-08-14 14:15:07 +02:00
Philip Prindeville
56fba3ecff geoip: simplify handling table column names
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-04-30 09:41:29 +02:00
Philip Prindeville
9057fb48f3 geoip: add database query tool for use with ipsets
Add a tool for retrieiving the IPv4 or IPv6 (or both!) CIDR ranges
for a given country, which can then be injected into an ipset if
one doesn't want to use (or have available) the xt_geoip extension.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-04-30 09:41:21 +02:00
Philip Prindeville
e19f91ddb4 geoip: update man page for xt_geoip_build
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-04-30 09:40:54 +02:00
Philip Prindeville
256ac1a4f6 geoip: adapt to GeoLite2 database
Requires Net::CIDR::Lite for manipulating CIDR blocks, aggregation, etc.
since database is stored as subnet/mask pairs and may require compaction
into ranges (which can combine adjacent subnets).

We don't use Net::CIDR because it's a clunkier interface.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-04-30 09:40:51 +02:00
Philip Prindeville
b91dbd03c7 geoip: store database in network byte order
This allows a single database to be built and distributed as a
package that is accepted by both big- and little-endian hosts.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-02-19 01:42:29 +01:00
Jan Engelhardt
254c6926d3 Xtables-addons 3.0 2018-02-12 15:17:10 +01:00
Jan Engelhardt
2e78cf03a4 build: support for Linux 4.16 2018-02-12 15:10:47 +01:00
Jan Engelhardt
bf63a25a64 build: remove support for Linux 4.14 2018-02-12 15:09:52 +01:00
Jan Engelhardt
94656621ed build: remove support for Linux 4.13 2018-02-12 15:09:41 +01:00
Jan Engelhardt
95d4f9e113 build: remove support for Linux 4.12 2018-02-12 15:09:32 +01:00
Jan Engelhardt
123e1a14e9 build: remove support for Linux 4.11 2018-02-12 15:09:25 +01:00
Jan Engelhardt
f4f3f98609 build: remove support for Linux 4.10 2018-02-12 15:09:15 +01:00
Jan Engelhardt
9b1c7c1c04 build: remove support for Linux 4.9 2018-02-12 14:59:44 +01:00
Jan Engelhardt
ed8e496750 build: remove support for Linux 4.8 2018-02-12 14:57:21 +01:00
Jan Engelhardt
5339fcc65b build: remove support for Linux 4.7 2018-02-12 14:56:57 +01:00
Jan Engelhardt
2265c1b854 build: remove support for Linux 4.6 2018-02-12 14:56:40 +01:00
Jan Engelhardt
2c574f992d build: remove support for Linux 4.5 2018-02-12 14:56:24 +01:00
Jan Engelhardt
3a24468a68 build: remove support for Linux 4.4 2018-02-12 14:56:05 +01:00
Jan Engelhardt
7682cc8c34 build: remove support for Linux 4.3 2018-02-12 14:55:45 +01:00
Jan Engelhardt
215b3c5b12 build: remove support for Linux 4.2 2018-02-12 14:54:26 +01:00
Jan Engelhardt
4dbb36b723 build: remove support for Linux 4.1 2018-02-12 14:53:25 +01:00
Jan Engelhardt
10f951e61d build: remove support for Linux 4.0 2018-02-12 14:53:01 +01:00
Jan Engelhardt
a4c50ae405 build: remove support for Linux 3.19 2018-02-12 14:50:33 +01:00
Jan Engelhardt
38d89983ca build: remove support for Linux 3.18 2018-02-12 14:49:20 +01:00
Jan Engelhardt
25985650a9 build: remove support for Linux 3.17 2018-02-12 14:48:53 +01:00
Jan Engelhardt
4de9ff1505 build: remove support for Linux 3.16 2018-02-12 14:48:34 +01:00
Jan Engelhardt
46b7cf206b build: remove support for Linux 3.15 2018-02-12 14:47:58 +01:00
Jan Engelhardt
29d10e11fa build: remove support for Linux 3.14 2018-02-12 14:46:50 +01:00
Jan Engelhardt
60a26f1dea build: remove support for Linux 3.13 2018-02-12 14:45:55 +01:00
Jan Engelhardt
cdf90737be build: remove support for Linux 3.12 2018-02-12 14:45:41 +01:00
Jan Engelhardt
5713415014 build: remove support for Linux 3.11 2018-02-12 14:45:30 +01:00
Jan Engelhardt
230bc1f327 build: remove support for Linux 3.10 2018-02-12 14:45:14 +01:00
Jan Engelhardt
d360f5578c build: remove support for Linux 3.9 2018-02-12 14:45:00 +01:00
Jan Engelhardt
dd32060f6a build: remove support for Linux 3.8 2018-02-12 14:40:30 +01:00
Jan Engelhardt
d5eb4e586c build: remove support for Linux 3.7 2018-02-12 14:39:36 +01:00
Jan Engelhardt
1b4b4347c5 geoip: apply consistent style to xt_geoip_build 2018-02-12 13:58:18 +01:00
Philip Prindeville
2f37af43c5 geoip: selective endianness catalog generation 2018-02-12 13:56:48 +01:00
Jan Engelhardt
56e5970c64 xt_pknock: don't split function heads 2018-01-05 01:36:12 +01:00
Marcelo Henrique Cerri
2b76b68c65 build: support for Linux 4.15
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
2018-01-05 01:35:12 +01:00
Seth Forshee
d2eeac4c32 build: (additional) support for Linux 4.14
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
2018-01-05 01:35:07 +01:00
21 changed files with 422 additions and 304 deletions

1
.gitignore vendored
View File

@@ -3,6 +3,7 @@
*.lo
*.loT
*.o
.cache.mk
.deps/
.dirstamp
.libs/

View File

@@ -12,16 +12,17 @@ in combination with the kernel's Kbuild system.
Supported configurations for this release
=========================================
* iptables >= 1.4.5
* iptables >= 1.6.0
* kernel-devel >= 3.7
* kernel-devel >= 4.15
with prepared build/output directory
- CONFIG_NF_CONNTRACK
- CONFIG_NF_CONNTRACK_MARK enabled =y or as module (=m)
- CONFIG_CONNECTOR y/m if you wish to receive userspace
notifications from pknock through netlink/connector
(Use xtables-addons-1.x if you need support for Linux < 3.7.)
(Use xtables-addons-1.x if you need support for Linux < 3.7.
Use xtables-addons-2.x if you need support for Linux < 4.15.)
Selecting extensions

View File

@@ -1,4 +1,4 @@
AC_INIT([xtables-addons], [2.14])
AC_INIT([xtables-addons], [3.2])
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_MACRO_DIR([m4])
@@ -26,7 +26,7 @@ fi
AC_CHECK_HEADERS([linux/netfilter/x_tables.h], [],
[AC_MSG_ERROR([You need to have linux/netfilter/x_tables.h, see INSTALL file for details])])
PKG_CHECK_MODULES([libxtables], [xtables >= 1.4.5])
PKG_CHECK_MODULES([libxtables], [xtables >= 1.6.0])
xtlibdir="$(pkg-config --variable=xtlibdir xtables)"
AC_ARG_WITH([xtlibdir],
@@ -57,12 +57,10 @@ if test -n "$kbuilddir"; then
echo "WARNING: Version detection did not succeed. Continue at own luck.";
else
echo "$kmajor.$kminor.$kmicro.$kstable in $kbuilddir";
if test "$kmajor" -gt 4 -o "$kmajor" -eq 4 -a "$kminor" -gt 12; then
if test "$kmajor" -gt 4 -o "$kmajor" -eq 4 -a "$kminor" -gt 18; then
echo "WARNING: That kernel version is not officially supported yet. Continue at own luck.";
elif test "$kmajor" -eq 4 -a "$kminor" -le 10; then
:;
elif test "$kmajor" -eq 3 -a "$kminor" -ge 7; then
:;
elif test "$kmajor" -eq 4 -a "$kminor" -ge 18; then
:
else
echo "WARNING: That kernel version is not officially supported.";
fi;

View File

@@ -3,6 +3,27 @@ HEAD
====
v3.2 (2018-09-07)
=================
Changes:
- rework xt_geoip_build to scan the immediate directory for .csv,
not to scan for GeoLite2-Country-CSV_\d+.
v3.1 (2018-08-14)
=================
Enhancements:
- support for Linux 4.17, 4.18
v3.0 (2018-02-12)
=================
Enhancements:
- support for Linux 4.15, 4.16
Changes:
- remove support for Linux 3.7--4.14
v2.14 (2017-11-22)
==================
Enhancements:
@@ -127,5 +148,5 @@ Changes:
Enhancements:
- Support for Linux 3.7
If you want to use Xtables-addons with kernels older than 3.7,
use the addons 1.x series (maintained but without new features).
If you want to use Xtables-addons with kernels older than 4.15,
use the addons 2.x series.

View File

@@ -482,16 +482,7 @@ static void ipt_acc_depth2_insert(struct ipt_acc_mask_8 *mask_8,
static unsigned int
ipt_acc_target(struct sk_buff *skb, const struct xt_action_param *par)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
struct ipt_acc_net *ian = net_generic(par->state->net, ipt_acc_net_id);
#else
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,4,0)
struct ipt_acc_net *ian = net_generic(par->net, ipt_acc_net_id);
#else
struct net *net = dev_net(par->in ? par->in : par->out);
struct ipt_acc_net *ian = net_generic(net, ipt_acc_net_id);
#endif
#endif
struct ipt_acc_table *ipt_acc_tables = ian->ipt_acc_tables;
const struct ipt_acc_info *info =
par->targinfo;

View File

@@ -8,12 +8,8 @@
#define DEBUGP Use__pr_debug__instead
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 7, 0)
# warning Kernels below 3.7 not supported.
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
# define prandom_u32() random32()
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
# warning Kernels below 4.15 not supported.
#endif
#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
@@ -46,51 +42,13 @@
# define NIPQUAD_FMT "%hhu.%hhu.%hhu.%hhu"
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 9, 0)
static inline struct inode *file_inode(struct file *f)
{
return f->f_path.dentry->d_inode;
}
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 10, 0)
static inline void proc_set_user(struct proc_dir_entry *de,
typeof(de->uid) uid, typeof(de->gid) gid)
{
de->uid = uid;
de->gid = gid;
}
static inline void *PDE_DATA(struct inode *inode)
{
return PDE(inode)->data;
}
static inline void proc_remove(struct proc_dir_entry *de)
{
if (de != NULL)
remove_proc_entry(de->name, de->parent);
}
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 4, 0)
# define ip6_local_out(xnet, xsk, xskb) ip6_local_out(xskb)
# define ip6_route_me_harder(xnet, xskb) ip6_route_me_harder(xskb)
# define ip_local_out(xnet, xsk, xskb) ip_local_out(xskb)
# define ip_route_me_harder(xnet, xskb, xaddrtype) ip_route_me_harder((xskb), (xaddrtype))
#endif
static inline struct net *par_net(const struct xt_action_param *par)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0)
return par->state->net;
#else
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 0)
return par->net;
#else
return dev_net((par->in != NULL) ? par->in : par->out);
#endif
#endif
}
#ifndef NF_CT_ASSERT
# define NF_CT_ASSERT(x) WARN_ON(!(x))
#endif
#endif /* _XTABLES_COMPAT_H */

View File

@@ -49,6 +49,38 @@ static struct option geoip_opts[] = {
{NULL},
};
#if __BYTE_ORDER == __LITTLE_ENDIAN
static void geoip_swap_le16(uint16_t *buf)
{
unsigned char *p = (void *)buf;
uint16_t n= p[0] + (p[1] << 8);
p[0] = (n >> 8) & 0xff;
p[1] = n & 0xff;
}
static void geoip_swap_in6(struct in6_addr *in6)
{
geoip_swap_le16(&in6->s6_addr16[0]);
geoip_swap_le16(&in6->s6_addr16[1]);
geoip_swap_le16(&in6->s6_addr16[2]);
geoip_swap_le16(&in6->s6_addr16[3]);
geoip_swap_le16(&in6->s6_addr16[4]);
geoip_swap_le16(&in6->s6_addr16[5]);
geoip_swap_le16(&in6->s6_addr16[6]);
geoip_swap_le16(&in6->s6_addr16[7]);
}
static void geoip_swap_le32(uint32_t *buf)
{
unsigned char *p = (void *)buf;
uint32_t n = p[0] + (p[1] << 8) + (p[2] << 16) + (p[3] << 24);
p[0] = (n >> 24) & 0xff;
p[1] = (n >> 16) & 0xff;
p[2] = (n >> 8) & 0xff;
p[3] = n & 0xff;
}
#endif
static void *
geoip_get_subnets(const char *code, uint32_t *count, uint8_t nfproto)
{
@@ -56,21 +88,15 @@ geoip_get_subnets(const char *code, uint32_t *count, uint8_t nfproto)
struct stat sb;
char buf[256];
int fd;
#if __BYTE_ORDER == __LITTLE_ENDIAN
unsigned int n;
#endif
/* Use simple integer vector files */
if (nfproto == NFPROTO_IPV6) {
#if __BYTE_ORDER == _BIG_ENDIAN
snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/BE/%s.iv6", code);
#else
snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/LE/%s.iv6", code);
#endif
} else {
#if __BYTE_ORDER == _BIG_ENDIAN
snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/BE/%s.iv4", code);
#else
snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/LE/%s.iv4", code);
#endif
}
if (nfproto == NFPROTO_IPV6)
snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/%s.iv6", code);
else
snprintf(buf, sizeof(buf), GEOIP_DB_DIR "/%s.iv4", code);
if ((fd = open(buf, O_RDONLY)) < 0) {
fprintf(stderr, "Could not open %s: %s\n", buf, strerror(errno));
@@ -98,6 +124,25 @@ geoip_get_subnets(const char *code, uint32_t *count, uint8_t nfproto)
xtables_error(OTHER_PROBLEM, "geoip: insufficient memory");
read(fd, subnets, sb.st_size);
close(fd);
#if __BYTE_ORDER == __LITTLE_ENDIAN
for (n = 0; n < *count; ++n) {
switch (nfproto) {
case NFPROTO_IPV6: {
struct geoip_subnet6 *gs6 = &(((struct geoip_subnet6 *)subnets)[n]);
geoip_swap_in6(&gs6->begin);
geoip_swap_in6(&gs6->end);
break;
}
case NFPROTO_IPV4: {
struct geoip_subnet4 *gs4 = &(((struct geoip_subnet4 *)subnets)[n]);
geoip_swap_le32(&gs4->begin);
geoip_swap_le32(&gs4->end);
break;
}
}
}
#endif
return subnets;
}

View File

@@ -357,11 +357,10 @@ has_logged_during_this_minute(const struct peer *peer)
*
* @r: rule
*/
static void
peer_gc(unsigned long r)
static void peer_gc(struct timer_list *tl)
{
unsigned int i;
struct xt_pknock_rule *rule = (struct xt_pknock_rule *)r;
struct xt_pknock_rule *rule = from_timer(rule, tl, timer);
struct peer *peer;
struct list_head *pos, *n;
@@ -468,11 +467,7 @@ add_rule(struct xt_pknock_mtinfo *info)
rule->peer_head = alloc_hashtable(peer_hashsize);
if (rule->peer_head == NULL)
goto out;
init_timer(&rule->timer);
rule->timer.function = peer_gc;
rule->timer.data = (unsigned long)rule;
timer_setup(&rule->timer, peer_gc, 0);
rule->status_proc = proc_create_data(info->rule_name, 0, pde,
&pknock_proc_ops, rule);
if (rule->status_proc == NULL)
@@ -699,13 +694,7 @@ msg_to_userspace_nl(const struct xt_pknock_mtinfo *info,
scnprintf(msg.rule_name, info->rule_name_len + 1, info->rule_name);
memcpy(m + 1, &msg, m->len);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 15, 0)
cn_netlink_send(m, 0, multicast_group, GFP_ATOMIC);
#else
cn_netlink_send(m, multicast_group, GFP_ATOMIC);
#endif
kfree(m);
#endif
return true;

View File

@@ -58,12 +58,7 @@ xt_chaos_total(struct sk_buff *skb, const struct xt_action_param *par)
{
struct xt_action_param local_par;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
local_par.state = par->state;
#else
local_par.in = par->in,
local_par.out = par->out,
#endif
local_par.match = xm_tcp;
local_par.matchinfo = &tcp_params;
local_par.fragoff = fragoff;
@@ -78,14 +73,7 @@ xt_chaos_total(struct sk_buff *skb, const struct xt_action_param *par)
destiny = (info->variant == XTCHAOS_TARPIT) ? xt_tarpit : xt_delude;
{
struct xt_action_param local_par;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
local_par.state = par->state;
#else
local_par.in = par->in;
local_par.out = par->out;
local_par.hooknum = par->hooknum;
local_par.family = par->family;
#endif
local_par.target = destiny;
local_par.targinfo = par->targinfo;
destiny->target(skb, &local_par);
@@ -108,27 +96,15 @@ chaos_tg(struct sk_buff *skb, const struct xt_action_param *par)
if ((unsigned int)prandom_u32() <= reject_percentage) {
struct xt_action_param local_par;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
local_par.state = par->state;
#else
local_par.in = par->in;
local_par.out = par->out;
local_par.hooknum = par->hooknum;
#endif
local_par.target = xt_reject;
local_par.targinfo = &reject_params;
return xt_reject->target(skb, &local_par);
}
/* TARPIT/DELUDE may not be called from the OUTPUT chain */
if (iph->protocol == IPPROTO_TCP &&
info->variant != XTCHAOS_NORMAL &&
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
par->state->hook
#else
par->hooknum
#endif
!= NF_INET_LOCAL_OUT)
if (iph->protocol == IPPROTO_TCP && info->variant != XTCHAOS_NORMAL &&
par->state->hook != NF_INET_LOCAL_OUT)
xt_chaos_total(skb, par);
return NF_DROP;

View File

@@ -107,13 +107,8 @@ static void delude_send_reset(struct net *net, struct sk_buff *oldskb,
addr_type = RTN_UNSPEC;
#ifdef CONFIG_BRIDGE_NETFILTER
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 1, 0)
if (hook != NF_INET_FORWARD || (nskb->nf_bridge != NULL &&
nskb->nf_bridge->physoutdev))
#else
if (hook != NF_INET_FORWARD || (nskb->nf_bridge != NULL &&
nskb->nf_bridge->mask & BRNF_BRIDGED))
#endif
#else
if (hook != NF_INET_FORWARD)
#endif
@@ -151,13 +146,7 @@ delude_tg(struct sk_buff *skb, const struct xt_action_param *par)
* a problem, as that is supported since Linux 2.6.35. But since we do not
* actually want to have a connection open, we are still going to drop it.
*/
delude_send_reset(par_net(par), skb,
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
par->state->hook
#else
par->hooknum
#endif
);
delude_send_reset(par_net(par), skb, par->state->hook);
return NF_DROP;
}

View File

@@ -356,26 +356,22 @@ out:
static unsigned int
dnetmap_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
struct net *net = dev_net(par->state->in ? par->state->in : par->state->out);
#else
struct net *net = dev_net(par->in ? par->in : par->out);
#endif
struct dnetmap_net *dnetmap_net = dnetmap_pernet(net);
struct nf_conn *ct;
enum ip_conntrack_info ctinfo;
__be32 prenat_ip, postnat_ip, prenat_ip_prev;
const struct xt_DNETMAP_tginfo *tginfo = par->targinfo;
const struct nf_nat_range *mr = &tginfo->prefix;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 18, 0)
struct nf_nat_range2 newrange;
#else
struct nf_nat_range newrange;
#endif
struct dnetmap_entry *e;
struct dnetmap_prefix *p;
__s32 jttl;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
unsigned int hooknum = par->state->hook;
#else
unsigned int hooknum = par->hooknum;
#endif
ct = nf_ct_get(skb, &ctinfo);
jttl = tginfo->flags & XT_DNETMAP_TTL ? tginfo->ttl * HZ : jtimeout;
@@ -500,12 +496,7 @@ bind_new_prefix:
newrange.max_addr.ip = postnat_ip;
newrange.min_proto = mr->min_proto;
newrange.max_proto = mr->max_proto;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
return nf_nat_setup_info(ct, &newrange, HOOK2MANIP(par->state->hook));
#else
return nf_nat_setup_info(ct, &newrange, HOOK2MANIP(par->hooknum));
#endif
no_rev_map:
no_free_ip:
spin_unlock_bh(&dnetmap_lock);

View File

@@ -35,11 +35,7 @@ echo_tg6(struct sk_buff *oldskb, const struct xt_action_param *par)
void *payload;
struct flowi6 fl;
struct dst_entry *dst = NULL;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
struct net *net = dev_net((par->state->in != NULL) ? par->state->in : par->state->out);
#else
struct net *net = dev_net((par->in != NULL) ? par->in : par->out);
#endif
/* This allows us to do the copy operation in fewer lines of code. */
if (skb_linearize(oldskb) < 0)

View File

@@ -64,12 +64,7 @@ static void logmark_ct(const struct nf_conn *ct, enum ip_conntrack_info ctinfo)
printk("%s""CONFIRMED", prev ? "," : "");
prev = true;
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,9,0)
printk(" lifetime=%lus", nf_ct_expires(ct) / HZ);
#else
printk(" lifetime=%lus",
(jiffies - ct->timeout.expires) / HZ);
#endif
}
static unsigned int
@@ -82,21 +77,13 @@ logmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
printk("<%u>%.*s""iif=%d hook=%s nfmark=0x%x "
"secmark=0x%x classify=0x%x",
info->level, (unsigned int)sizeof(info->prefix), info->prefix,
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
skb_ifindex(skb), hook_names[par->state->hook],
#else
skb_ifindex(skb), hook_names[par->hooknum],
#endif
skb_nfmark(skb), skb_secmark(skb), skb->priority);
ct = nf_ct_get(skb, &ctinfo);
printk(" ctdir=%s", dir_names[ctinfo >= IP_CT_IS_REPLY]);
if (ct == NULL)
printk(" ct=NULL ctmark=NULL ctstate=INVALID ctstatus=NONE");
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 12, 0)
else if (nf_ct_is_untracked(ct))
printk(" ct=UNTRACKED ctmark=NULL ctstate=UNTRACKED ctstatus=NONE");
#endif
else
logmark_ct(ct, ctinfo);

View File

@@ -249,13 +249,8 @@ static void tarpit_tcp4(struct net *net, struct sk_buff *oldskb,
niph->id = ~oldhdr->id + 1;
#ifdef CONFIG_BRIDGE_NETFILTER
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 1, 0)
if (hook != NF_INET_FORWARD || (nskb->nf_bridge != NULL &&
nskb->nf_bridge->physoutdev != NULL))
#else
if (hook != NF_INET_FORWARD || (nskb->nf_bridge != NULL &&
nskb->nf_bridge->mask & BRNF_BRIDGED))
#endif
#else
if (hook != NF_INET_FORWARD)
#endif
@@ -283,17 +278,8 @@ static void tarpit_tcp4(struct net *net, struct sk_buff *oldskb,
goto free_nskb;
nf_ct_attach(nskb, oldskb);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 0)
NF_HOOK(NFPROTO_IPV4, NF_INET_LOCAL_OUT, net, nskb->sk, nskb, NULL,
skb_dst(nskb)->dev, dst_output);
#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 1, 0)
NF_HOOK(NFPROTO_IPV4, NF_INET_LOCAL_OUT, nskb->sk, nskb, NULL,
skb_dst(nskb)->dev, dst_output_sk);
#else
NF_HOOK(NFPROTO_IPV4, NF_INET_LOCAL_OUT, nskb, NULL,
skb_dst(nskb)->dev, dst_output);
#endif
return;
free_nskb:
@@ -406,17 +392,8 @@ static void tarpit_tcp6(struct net *net, struct sk_buff *oldskb,
nskb->ip_summed = CHECKSUM_NONE;
nf_ct_attach(nskb, oldskb);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 0)
NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT, net, nskb->sk, nskb, NULL,
skb_dst(nskb)->dev, dst_output);
#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 1, 0)
NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT, nskb->sk, nskb, NULL,
skb_dst(nskb)->dev, dst_output_sk);
#else
NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT, nskb, NULL,
skb_dst(nskb)->dev, dst_output);
#endif
return;
free_nskb:
@@ -454,12 +431,7 @@ tarpit_tg4(struct sk_buff *skb, const struct xt_action_param *par)
/* We are not interested in fragments */
if (iph->frag_off & htons(IP_OFFSET))
return NF_DROP;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
tarpit_tcp4(par_net(par), skb, par->state->hook, info->variant);
#else
tarpit_tcp4(par_net(par), skb, par->hooknum, info->variant);
#endif
return NF_DROP;
}
@@ -500,12 +472,7 @@ tarpit_tg6(struct sk_buff *skb, const struct xt_action_param *par)
pr_debug("addr is not unicast.\n");
return NF_DROP;
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
tarpit_tcp6(par_net(par), skb, par->state->hook, info->variant);
#else
tarpit_tcp6(par_net(par), skb, par->hooknum, info->variant);
#endif
return NF_DROP;
}
#endif

View File

@@ -45,17 +45,9 @@ static const struct net_device *iface_get(const struct xt_iface_mtinfo *info,
const struct xt_action_param *par, struct net_device **put)
{
if (info->flags & XT_IFACE_DEV_IN)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
return par->state->in;
#else
return par->in;
#endif
else if (info->flags & XT_IFACE_DEV_OUT)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
return par->state->out;
#else
return par->out;
#endif
return *put = dev_get_by_name(&init_net, info->ifname);
}

View File

@@ -204,11 +204,7 @@ lscan_mt(const struct sk_buff *skb, struct xt_action_param *par)
unsigned int n;
n = lscan_mt_full(ctdata->mark & connmark_mask, ctstate,
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,10,0)
par->state->in == init_net.loopback_dev, tcph,
#else
par->in == init_net.loopback_dev, tcph,
#endif
skb->len - par->thoff - 4 * tcph->doff);
ctdata->mark = (ctdata->mark & ~connmark_mask) | n;

View File

@@ -1,10 +1,13 @@
#!/usr/bin/perl
#
# Converter for MaxMind CSV database to binary, for xt_geoip
# Copyright © Jan Engelhardt, 2008-2011
# Converter for MaxMind (GeoLite2) CSV database to binary, for xt_geoip
# Copyright Jan Engelhardt, 2008-2011
# Copyright Philip Prindeville, 2018
#
use Getopt::Long;
use IO::Handle;
use Net::CIDR::Lite;
use Socket qw(AF_INET AF_INET6 inet_pton);
use warnings;
use Text::CSV_XS; # or trade for Text::CSV
use strict;
@@ -13,52 +16,201 @@ my $csv = Text::CSV_XS->new({
binary => 1,
eol => $/,
}); # or Text::CSV
my $source_dir = ".";
my $target_dir = ".";
&Getopt::Long::Configure(qw(bundling));
&GetOptions(
"D=s" => \$target_dir,
"S=s" => \$source_dir,
);
if (!-d $target_dir) {
print STDERR "Target directory $target_dir does not exist.\n";
if (!-d $source_dir) {
print STDERR "Source directory \"$source_dir\" does not exist.\n";
exit 1;
}
foreach (qw(LE BE)) {
my $dir = "$target_dir/$_";
if (!-e $dir && !mkdir($dir)) {
print STDERR "Could not mkdir $dir: $!\n";
exit 1;
}
if (!-d $target_dir) {
print STDERR "Target directory \"$target_dir\" does not exist.\n";
exit 1;
}
my %countryId;
my %countryName;
&loadCountries();
&dump(&collect());
sub loadCountries
{
sub id; sub cc; sub long; sub ct; sub cn;
%countryId = ();
%countryName = ();
my $file = "$source_dir/GeoLite2-Country-Locations-en.csv";
open(my $fh, '<', $file) || die "Couldn't open list country names\n";
# first line is headers
my $row = $csv->getline($fh);
my %header = map { ($row->[$_], $_); } (0..$#{$row});
my %pairs = (
country_iso_code => 'ISO Country Code',
geoname_id => 'ID',
country_name => 'Country Name',
continent_code => 'Continent Code',
continent_name => 'Continent Name',
);
# verify that the columns we need are present
map { die "Table has no $pairs{$_} column\n" unless (exists $header{$_}); } keys %pairs;
my %remapping = (
id => 'geoname_id',
cc => 'country_iso_code',
long => 'country_name',
ct => 'continent_code',
cn => 'continent_name',
);
# now create a function which returns the value of that column #
map { eval "sub $_ () { \$header{\$remapping{$_}}; }" ; } keys %remapping;
while (my $row = $csv->getline($fh)) {
if ($row->[cc] eq '' && $row->[long] eq '') {
$countryId{$row->[id]} = $row->[ct];
$countryName{$row->[ct]} = $row->[cn];
} else {
$countryId{$row->[id]} = $row->[cc];
$countryName{$row->[cc]} = $row->[long];
}
}
$countryName{A1} = 'Anonymous Proxy';
$countryName{A2} = 'Satellite Provider';
$countryName{O1} = 'Other Country';
close($fh);
# clean up the namespace
undef &id; undef &cc; undef &long; undef &ct; undef &cn;
}
sub lookupCountry
{
my ($id, $rid, $proxy, $sat) = @_;
if ($proxy) {
return 'A1';
} elsif ($sat) {
return 'A2';
}
$id ||= $rid;
if ($id eq '') {
return 'O1';
}
die "Unknown id: $id line $.\n" unless (exists $countryId{$id});
return $countryId{$id};
}
sub collect
{
my %country;
my ($file, $fh, $row);
my (%country, %header);
sub net; sub id; sub rid; sub proxy; sub sat;
my %pairs = (
network => 'Network',
registered_country_geoname_id => 'Registered Country ID',
geoname_id => 'Country ID',
is_anonymous_proxy => 'Anonymous Proxy',
is_satellite_provider => 'Satellite',
);
foreach (sort keys %countryName) {
$country{$_} = {
name => $countryName{$_},
pool_v4 => Net::CIDR::Lite->new(),
pool_v6 => Net::CIDR::Lite->new(),
};
}
$file = "$source_dir/GeoLite2-Country-Blocks-IPv4.csv";
open($fh, '<', $file) || die "Can't open IPv4 database\n";
# first line is headers
$row = $csv->getline($fh);
%header = map { ($row->[$_], $_); } (0..$#{$row});
# verify that the columns we need are present
map { die "Table has no %pairs{$_} column\n" unless (exists $header{$_}); } keys %pairs;
my %remapping = (
net => 'network',
id => 'geoname_id',
rid => 'registered_country_geoname_id',
proxy => 'is_anonymous_proxy',
sat => 'is_satellite_provider',
);
# now create a function which returns the value of that column #
map { eval "sub $_ () { \$header{\$remapping{$_}}; }" ; } keys %remapping;
while ($row = $csv->getline($fh)) {
my ($cc, $cidr);
$cc = lookupCountry($row->[id], $row->[rid], $row->[proxy], $row->[sat]);
$cidr = $row->[net];
$country{$cc}->{pool_v4}->add($cidr);
while (my $row = $csv->getline(*ARGV)) {
if (!defined($country{$row->[4]})) {
$country{$row->[4]} = {
name => $row->[5],
pool_v4 => [],
pool_v6 => [],
};
}
my $c = $country{$row->[4]};
if ($row->[0] =~ /:/) {
push(@{$c->{pool_v6}},
[&ip6_pack($row->[0]), &ip6_pack($row->[1])]);
} else {
push(@{$c->{pool_v4}}, [$row->[2], $row->[3]]);
}
if ($. % 4096 == 0) {
print STDERR "\r\e[2K$. entries";
}
}
print STDERR "\r\e[2K$. entries total\n";
close($fh);
# clean up the namespace
undef &net; undef &id; undef &rid; undef &proxy; undef &sat;
$file = "$source_dir/GeoLite2-Country-Blocks-IPv6.csv";
open($fh, '<', $file) || die "Can't open IPv6 database\n";
# first line is headers
$row = $csv->getline($fh);
%header = map { ($row->[$_], $_); } (0..$#{$row});
# verify that the columns we need are present
map { die "Table has no %pairs{$_} column\n" unless (exists $header{$_}); } keys %pairs;
# unlikely the IPv6 table has different columns, but just to be sure
# create a function which returns the value of that column #
map { eval "sub $_ () { \$header{\$remapping{$_}}; }" ; } keys %remapping;
while ($row = $csv->getline($fh)) {
my ($cc, $cidr);
$cc = lookupCountry($row->[id], $row->[rid], $row->[proxy], $row->[sat]);
$cidr = $row->[net];
$country{$cc}->{pool_v6}->add($cidr);
if ($. % 4096 == 0) {
print STDERR "\r\e[2K$. entries";
}
}
print STDERR "\r\e[2K$. entries total\n";
close($fh);
# clean up the namespace
undef &net; undef &id; undef &rid; undef &proxy; undef &sat;
return \%country;
}
@@ -66,7 +218,7 @@ sub dump
{
my $country = shift @_;
foreach my $iso_code (sort keys %$country) {
foreach my $iso_code (sort keys %{$country}) {
&dump_one($iso_code, $country->{$iso_code});
}
}
@@ -74,68 +226,40 @@ sub dump
sub dump_one
{
my($iso_code, $country) = @_;
my($file, $fh_le, $fh_be);
my @ranges;
printf "%5u IPv6 ranges for %s %s\n",
scalar(@{$country->{pool_v6}}),
$iso_code, $country->{name};
@ranges = $country->{pool_v4}->list_range();
$file = "$target_dir/LE/".uc($iso_code).".iv6";
if (!open($fh_le, "> $file")) {
print STDERR "Error opening $file: $!\n";
exit 1;
}
$file = "$target_dir/BE/".uc($iso_code).".iv6";
if (!open($fh_be, "> $file")) {
print STDERR "Error opening $file: $!\n";
exit 1;
}
foreach my $range (@{$country->{pool_v6}}) {
print $fh_be $range->[0], $range->[1];
print $fh_le &ip6_swap($range->[0]), &ip6_swap($range->[1]);
}
close $fh_le;
close $fh_be;
writeCountry($iso_code, $country->{name}, AF_INET, @ranges);
printf "%5u IPv4 ranges for %s %s\n",
scalar(@{$country->{pool_v4}}),
$iso_code, $country->{name};
@ranges = $country->{pool_v6}->list_range();
$file = "$target_dir/LE/".uc($iso_code).".iv4";
if (!open($fh_le, "> $file")) {
print STDERR "Error opening $file: $!\n";
exit 1;
}
$file = "$target_dir/BE/".uc($iso_code).".iv4";
if (!open($fh_be, "> $file")) {
print STDERR "Error opening $file: $!\n";
exit 1;
}
foreach my $range (@{$country->{pool_v4}}) {
print $fh_le pack("VV", $range->[0], $range->[1]);
print $fh_be pack("NN", $range->[0], $range->[1]);
}
close $fh_le;
close $fh_be;
writeCountry($iso_code, $country->{name}, AF_INET6, @ranges);
}
sub ip6_pack
sub writeCountry
{
my $addr = shift @_;
$addr =~ s{::}{:!:};
my @addr = split(/:/, $addr);
my @e = (0) x 8;
foreach (@addr) {
if ($_ eq "!") {
$_ = join(':', @e[0..(8-scalar(@addr))]);
}
}
@addr = split(/:/, join(':', @addr));
$_ = hex($_) foreach @addr;
return pack("n*", @addr);
}
my ($iso_code, $name, $family, @ranges) = @_;
my $fh;
sub ip6_swap
{
return pack("V*", unpack("N*", shift @_));
printf "%5u IPv%s ranges for %s %s\n",
scalar(@ranges),
($family == AF_INET ? '4' : '6'),
$iso_code, $name;
my $file = "$target_dir/".uc($iso_code).".iv".($family == AF_INET ? '4' : '6');
if (!open($fh, '>', $file)) {
print STDERR "Error opening $file: $!\n";
exit 1;
}
binmode($fh);
foreach my $range (@ranges) {
my ($start, $end) = split('-', $range);
$start = inet_pton($family, $start);
$end = inet_pton($family, $end);
print $fh $start, $end;
}
close $fh;
}

View File

@@ -5,7 +5,7 @@ xt_geoip_build \(em convert GeoIP.csv to packed format for xt_geoip
.SH Syntax
.PP
\fI/usr/libexec/xt_geoip/\fP\fBxt_geoip_build\fP [\fB\-D\fP
\fItarget_dir\fP] [\fIfile\fP...]
\fItarget_dir\fP] [\fB\-S\fP \fIsource_dir\fP]
.SH Description
.PP
xt_geoip_build is used to build packed raw representations of the range
@@ -16,15 +16,19 @@ required to be loaded into memory. The ranges in the packed database files are
also ordered, as xt_geoip relies on this property for its bisection approach to
work.
.PP
Input is processed from the listed files, or if none is given, from stdin.
.PP
Since the script is usually installed to the libexec directory of the
xtables-addons package and this is outside $PATH (on purpose), invoking the
script requires it to be called with a path.
.PP Options
.TP
\fB\-D\fP \fItarget_dir\fP
Specify a target directory into which the files are to be put.
Specifies the target directory into which the files are to be put. Defaults to ".".
.TP
\fB\-S\fP \fIsource_dir\fP
Specifies the source directory from which to read the three files by the name
of \fBGeoLite2\-Country\-Blocks\-IPv4.csv\fP,
\fBGeoLite2\-Country\-Blocks\-IPv6.csv\fP and
\fBGeoLite2\-Country\-Locations\-en.csv\fP. Defaults to ".".
.SH Application
.PP
Shell commands to build the databases and put them to where they are expected:

View File

@@ -1,8 +1,7 @@
#!/bin/sh
rm -f GeoIPv6.csv GeoIPv6.csv.gz GeoIPCountryCSV.zip GeoIPCountryWhois.csv;
wget \
http://geolite.maxmind.com/download/geoip/database/GeoIPv6.csv.gz \
http://geolite.maxmind.com/download/geoip/database/GeoIPCountryCSV.zip;
gzip -d GeoIPv6.csv.gz;
unzip GeoIPCountryCSV.zip;
rm -rf GeoLite2-Country-CSV_*
wget -q http://geolite.maxmind.com/download/geoip/database/GeoLite2-Country-CSV.zip
unzip -q GeoLite2-Country-CSV.zip
rm -f GeoLite2-Country-CSV.zip

93
geoip/xt_geoip_fetch Executable file
View File

@@ -0,0 +1,93 @@
#!/usr/bin/perl
#
# Utility to query GeoIP database
# Copyright Philip Prindeville, 2018
#
use Getopt::Long;
use Socket qw(AF_INET AF_INET6 inet_ntop);
use warnings;
use strict;
sub AF_INET_SIZE() { 4 }
sub AF_INET6_SIZE() { 16 }
my $target_dir = ".";
my $ipv4 = 0;
my $ipv6 = 0;
&Getopt::Long::Configure(qw(bundling));
&GetOptions(
"D=s" => \$target_dir,
"4" => \$ipv4,
"6" => \$ipv6,
);
if (!-d $target_dir) {
print STDERR "Target directory $target_dir does not exit.\n";
exit 1;
}
# if neither specified, assume both
if (! $ipv4 && ! $ipv6) {
$ipv4 = $ipv6 = 1;
}
foreach my $cc (@ARGV) {
if ($cc !~ m/^([a-z]{2}|a[12]|o1)$/i) {
print STDERR "Invalid country code '$cc'\n";
exit 1;
}
my $file = $target_dir . '/' . uc($cc) . '.iv4';
if (! -f $file) {
printf STDERR "Can't find data for country '$cc'\n";
exit 1;
}
my ($contents, $buffer, $bytes, $fh);
if ($ipv4) {
open($fh, '<', $file) || die "Couldn't open file for '$cc'\n";
binmode($fh);
while (($bytes = read($fh, $buffer, AF_INET_SIZE * 2)) == AF_INET_SIZE * 2) {
my $start = inet_ntop(AF_INET, substr($buffer, 0, AF_INET_SIZE));
my $end = inet_ntop(AF_INET, substr($buffer, AF_INET_SIZE));
print $start, '-', $end, "\n";
}
close($fh);
if (! defined $bytes) {
printf STDERR "Error reading file for '$cc'\n";
exit 1;
} elsif ($bytes != 0) {
printf STDERR "Short read on file for '$cc'\n";
exit 1;
}
}
substr($file, -1) = '6';
if ($ipv6) {
open($fh, '<', $file) || die "Couldn't open file for '$cc'\n";
binmode($fh);
while (($bytes = read($fh, $buffer, AF_INET6_SIZE * 2)) == AF_INET6_SIZE * 2) {
my $start = inet_ntop(AF_INET6, substr($buffer, 0, AF_INET6_SIZE));
my $end = inet_ntop(AF_INET6, substr($buffer, AF_INET6_SIZE));
print $start, '-', $end, "\n";
}
close($fh);
if (! defined $bytes) {
printf STDERR "Error reading file for '$cc'\n";
exit 1;
} elsif ($bytes != 0) {
printf STDERR "Short read on file for '$cc'\n";
exit 1;
}
}
}
exit 0;

View File

@@ -1,4 +1,4 @@
.TH xtables-addons 8 "" "" "v2.14 (2017-11-22)"
.TH xtables-addons 8 "Retro" "" "v3.2 (2018-09-07)"
.SH Name
Xtables-addons \(em additional extensions for iptables, ip6tables, etc.
.SH Targets